ams AS5200L-MF_EK_AB Adapter Board is a printed circuit board that evaluates the AS5200L Position Sensors. AS5200L are stacked dual die magnetic rotary position sensors with redundant high-resolution 12-bit I2C or Pulse Width Modulation outputs. The adapter board allows testing without the need to build a test fixture or design a PCB. The board can be directly connected to an industry-standard I2C port of amicrocontroller.
Specifications
PCB can be connected either to an external microcontroller, or to the USB I&P BoxP1 is populated with a 2x4 90° pin header and is required for power supply as well as I
2C (SCL, SDA) and PWM (OUTB, OUTT).Connector J1 allows to select between 5V or 3.3V operation for the Bottom DieConnector J2 allows to select between 5V or 3.3V operation for the Top DieR1 and R2 are pull-up resistors for SCL and SDA lineC1-C4 are decoupling capacitors
Kit Contents
Adapter boardDiametric magnet D6x2.5mm, NdFeB, Bomatec AGAdapter PCB to connect with the USB I&P Box
